Anti-Corrosive Epoxy Powder Paint

• Usage: Powder Coating
• Color: Ral Colors
• Appearance: Powder
• Method: Spray
• Components: Pigment
• Main Raw Material: Polyester
• Level: Finish Coat
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Steel
• Expiration Date: 1 year
• Application: Electrostatic Spraying
• Colors: Ral Color
• Powder System: Polyester
• Curing Condition: 180-200c/ 10-20minutes
• Transport Package: 25kg/Carton
• Specification: SGS
• Trademark: EVER
• Origin: China
• Production Capacity: 100t/Month

Product Description

 
 

Product Description:
 
Thermosetting Fusion Bonded Epoxy Powder designed for lining the internal surface of line pipes, tubes and fittings used for oil and gas transportation. It can be used without primer on nonproduction tubing such as valves and pumps. When applied over a Phenolic primer, it resist to waste water, corrosive soils, hydrocarbons and sea water. It is based on specially selected Epoxy resins and hardeners formulated in order to meet the specifications related to the internal protection of line pipes. Powder can be applied electrostatically or by air-spray equipments
 
 
Powder Properties:
 

	Gel Temperature  Time	Curing Temperature Time	Film Thickness
single	230 ºC/ 8~ 13 Sec.	230 ºC/ 90~ 100 Sec.	300~400 um
3 layer	230 ºC/ 10~ 20 Sec.	230 ºC/ 90~ 100 Sec.	80~120 um

 
 

Chemical Type -		: Fusion Bonded Epoxy
Color -		: blue/Green
Particle Size	(CSA-Z245.20-10) -	: 99.8% below 250 micron
Specific Gravity	(CSA-Z245.20-10) -	: 1.50 +- 0.05
Moisture Content	(CSA-Z245.20-10) -	: Below 0.50%
		(at manufacturing time)
Thermal Characteristics	(CSA-Z245.20-10) -	: Tg1 = 55 - 70  C
		Tg2 = 105 +- 5  C
		Delta H = 40-60 J/g

   

 
Coating Properties:
 
 
 

Flexibility	(CSA-Z245.20-10) -	: Pass 3% strain
Impact resistance	(CSA-Z245.20-10) -	: > 3.0 J (No Holiday)
Cross Section Porosity	(CSA-Z245.20-10) -	: Average Rating-1
Adhesion	(CSA-Z245.20-10) -	: Rating 1 - 2
	75  C for 24hours
Pencil Hardness	(ASTM D 3363) -	: 2H Pass
Salt Spray	(ASTM B117)-	: No blistering
		No loss of adhesionHot
Water Immersion	(ASTM D870) -	: No blistering
	1000hurs @100  C	No loss of adhesion

 
 
_______________________________________________
 
 
Storage Conditions: Store Powder in a Dry cool condition below 25˚ C temperature & relative humidity of 65% for 12 month. Do not exceed 33 ˚ C. Keep powder in packed condition if not in use to ovoid contamination and moisture. Do not mix with any other Powder.
 
 
_____________________________________________________________________
 
The information in this Data Sheet is the outcome of our research work and experience. The information contained herein is believed to be accurate but cannot be taken as a   warranty. According to the policy of Jinhu Color Powder Coating Co.ltd , the results are subject to change without notice. It is recommended to check the product carefully prior to application