Fbe Powder Coating 3 Layer Coats Highly Anti Corrosion for Pipeline
|Min. Order (kgs)||FOB Price|
|500+||US $2.66 / kgs|
FBE powder coating 3 layer coats highly anti corrosion for pipeline
1.Introduction of the products
FBE powder coating is one of thermosetting epoxy powder coating especially planning
for the pipe 3-parts anti-corrosion. It can be made of a good Anti-corrosion system with
viscosity and high-gravity polyethylene .the coating with good Cathodic disbanding, good
adhesion ,water-proof and superior mechanical. This system including the good specific
properties epoxy coating and high-gravity polyethylene, is one of the population
Anti-corrosion technical .
1.With good adhesion to the primer material.
2.with fitted gelling time.
3.the coating film has good high temperature resistance with a Anti-corrosion property
for long time
4.the temperature scope -30-90ºC
5.the coating film with good anti- Cathodic peeling
6.3-films can be connect each other.
7.can reduce the damage in working and shipping.
1. coating ways : high-pressure /grinding electrostatic spraying
2. thickness : 60-150um
3. surface : grinding offer or blast-cleaning
1. Cleaning the surface oil, rust ,water and other dirty.
2.Sandblasting to Sa2.5, the anchor depth to 40-100um, the surface to white.
3.Cleaning the surface of the pope
4.The material heating temperature at 180-220ºC
5.Using the electrostatic spraying, thickness at 60-150um
6.Adhesive is pained on the coating, thickness 200um min.
7.The polyethylene is blinded at temperature 240 ºC and adhesion the
medial-materials to fast combine with gum coating by hard rolling
5.The coating property
1.the density(GB/T4472-1984):1.3-1.5g/cm 3 (according to the color)
2.nonvolatile content(GB/6554-1986): ≥99.4%
4.getting time: 180ºC 90s
: 205ºC 12-50s
: 230ºC 15s
5. hard intro :≥98%
6.materials usage: 0.6-0.8m2/kg/mm
7.hot speciality Tg:≤5ºC
1.EB powder coating be used on the heating materials.
2.the adhesive be used before the coating getting
3.the high-temperature adhesive and PE can be offer the protection.
180 ºC 5min
8.the coating film property
2.Cathodic peeling: 24 hour cathodic peeling:≤ 8mm
:28day cathodic peeling: ≤10mm
3.3°Flexibility: No Carcking
5.Cross-section porosity: ≤3
6.1.5J Impact resistance: No holidays
7. 28day Cathodic peeling: No Carcking
1.the coating for the oil pipe and gas.
2.the government gas pipe
Non-poisonous ,non-contamination, protecting absorb.
11.Story and shipping
12 months under 30ºC
20kg per package
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25kg net weight.
- RAL colors coating powder
- Pantone colors
- Color-matching regarding customer requirement is available
- Polyester /Hybrid powder coating
- Epoxy Powder coating color
- Metallic powder coating color
- Hammer tone color powder coating
- Texture color powder coating powder
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
- Specific gravity :1.2 ~ 1.8g/cm3 up to colors
- Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
- Level of liquidity:24 ~ 27 mm
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer free samples to you.
You can contact me informatoin as follows,