Ral7032 Ployester Smooth Grey Beige Color Matt/Matte Powder Coating Paints

• Usage: Powder Coating
• Color: Ral Color
• Appearance: Powder
• Method: Spray
• Components: Pigment
• Main Raw Material: Epoxy
• Level: Finish Coat
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Steel
• Expiration Date: 1 year
• Application: Electrostatic Spraying
• Colors: Ral Color
• Powder System: Epoxy Polyester
• Curing Condition: 180-200c/ 10-20minutes
• Transport Package: 25kg/Carton
• Specification: SGS
• Trademark: EVER
• Origin: China
• Production Capacity: 100t/Month

Product Description

 

Introduction:	This series of products are mainly made of saturated polyester resin and acrylic resin.
Feature:	Gloss can reach 2-5%(60 soft and comfortable Good flowing property,smooth appearance and flat handle Suitable for long-term outdoor usage Good impact resistance Good resistance to baking-yellowing Reasonable price and low cost
Uses:	Outdoor lighting Housing facilities Building materials Other outdoor low-glossy coating
Apply Condition:	Outdoor glossless powder coatings are specially suitable for coating following equipment:
	Corona electrostatic spray coating Electrostatic-fluidized bed painting Fluidized bed Triboelectrification coating
Thickness:	40~150μm,recommended thickness is 50~80μm.
Baking conditions:	See the following chart
Physical Property:
S.G	1.4-1.8g/cm3(ingredient&color demand)
Granularity Distribution:	standard:average granularity is 35-40μm,<10μm powder<10%, >90μm powder<0.5%.
Coating Film Property:	All the tests are using 0.8mmcold rolling sheet,Thickness: 50-80μm.
Mechanical properties:
Pencil hardness	GB/T 6739-1996 H-2H
Adhesion(cross-cut)	GB/T 9286-1998 0 grade
Bend test	GB/T 6742-1986 ≤2mm
Impact strength test	GB/T 1732-1993 ≥50kg.cm
Cupping test	GB/T 9753-1988 ≥6mm
Corrosion resistance:
Salt fog test	GB/T 1771-1991 >500h
Humid heat test	GB/T 1740-1979 >1000h
Temperature resistance	100ºC/48h (white anel) color retention E≤0.6
Weather resistance	Accelerated light aging testQUV-B313 (240h,8h/60ºC lighting,4h/50ºC rain) GB/T14522-1993 gloss retention rate≥80%,no change with color.
Packing:	Double PP bags, N.W 20kg/carton
Storage:	12 months within 30ºC,avoid direct sunlight.
Health and Safety:	Refer to the MSDS.
Color Table:

Application and Storage Conditions

1. Oil, grease and rust should be removed by degreaser. Then zinc phosphate pretreatment is recommended for optimum performance.
2. Use the electrostatic spray gun to application on substrates.
3. The film should be cure on metal temperature at 200ºC for 10 minutes.
4. Film thickness should be control at 60~90 um  for high performance.

5. Shelf life is six months when stored in dry conditions at 25ºC.
 

Properties	Test Method	Result
1. Specific gravity	Calculated	1.4±0.3
2. Impact Resistance	ASTM D2794	100 inch. lbs, no remove
3. Pencil Hard	ASTM D3363	H
4. 60 Degree Gloss	ASTM D523	3° ±1%
5. Salt Spray Resistance*	ASTM B117	1000 hr
6. Cross Hatch Adhesion*	ASTM D3359	5B pass
7. Humidity Resistance *	ASTM D2247, 1000hr	No Removed, no bubble
8. UV exposure*	ASTM G154(Cycle 1), 400hr	Gloss retain >50%

*Testing was performed on
Disclaimer: This product data sheet is based on our knowledge and on current laws. The data referring to powder properties, application data and physical tests is based on lab-based samples. The highest quality powder coating finish results from proper substrate surface preparation, appropriate pretreatment, effective rinse stages, proper powder coating application and sufficient temperature and dwell to ensure the powder coating is cured. Factors such as quality or cure condition of the substrate may have an effect on the use and application of the product. It remains the responsibility of the user to test thoroughly if the product is applicable for the intended use. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation. We are not liable for any application-technological advice.

Q1: Are you a factory or trading company? 
A1: We are a factory manufacturing products for over 28 years in Jinhu, China. 
Q2: Why should I use powder coatings? 
A2: There are some advantages of powder coatings. For example, they are harmless to humans. In addition, they also have resource efficiency and reduction of environmental pollution. After being coating, it forms a lasting film to protect the surface of the items. 
Q3: Why should I buy from you not from other suppliers? 
A3: We have a professional group of R&D. According to our clients' preference, we can adjust the formula to change the color, luster, appearance, and even metal texture and special patterns. Besides, we offer complete services before and after your purchasing, including color proofing, technical analysis, application recommendations, and after-sales services. 
Q4: How about the delivery date? 
A4: The delivery date will be within 15 days. 
Q5: Can you offer the sample of my ideal color? 
A5: Yes, we are pleasure to do. Please contact us to get the information. Besides, we can provide some color cards you have ordered in the delivery. 
Q6: If there is no my ideal color, what can you offer me? 
A6: We have the color proofing service, if any demands, feel free to contact us.
If any other questions, please feel free to contact us. We are glad to respond.