|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| CAS No.: | N/a |
| Formula: | N/a |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Sample Available for Testing!
Qualicoat Certified Super Durable Thermosetting Powder Coating for Aluminum Extrusion ProfilesNeed powder coating for metal parts?
You bring the color, surface finish, application, and performance requirements.
We bring 33 years of production experience, exports to 70+ countries, 20+ regional agents, and 9000 tons annual capacity.
No guesswork. No random recommendation.
We help you match the right powder coating, prepare samples, provide technical data, and support your testing process.
Contact Raelyn to start your sample test.
Cleaner coating process with very low VOC emissions, helping reduce solvent odor, fire risks, and environmental concerns.
Oversprayed powder can be collected and reused under proper production conditions, reducing waste and improving cost efficiency.
Forms a uniform and durable coating film in one application after proper pretreatment, suitable for automatic spraying lines.
Solid powder form, no solvent evaporation, convenient for storage and shipment under dry and ventilated conditions.
3. Product Series
We can provide powder coatings with different gloss levels and surface effects according to customer requirements.
Customized colors and surface effects are available upon request. Common options include RAL 9005 black, customized black shades, smooth finish, matt finish, semi-gloss finish, and fine texture finish.
4. Powder Physical Properties
|
Item |
Typical Value |
|
Product Type |
Polyester Powder Coating |
|
Color |
RAL 9005 |
|
Appearance |
Fine powder |
|
Specific Gravity |
1.2-1.8 g/cm³, depending on color and gloss |
|
Particle Size Distribution |
100% below 125 μm |
|
Main Particle Range |
More than 85% between 60-90 μm |
|
Flow at 180°C |
22-35 mm |
|
Recommended Curing Condition |
200°C × 10 minutes |
|
Recommended Film Thickness |
Around 60 μm |
5. Coating performance
|
Coating performance |
||||
|
Test items |
Inspection standards |
Test indicators |
||
|
High light |
Glazed/Matte/Low light |
|||
|
Impact resistance |
ISO6272 |
GB/T1732-1993 |
50kg/cm |
40kg/cm |
|
Cupping test |
ISO1520 |
GB/T9753-1988 |
8mm |
7mm |
|
The adhesion (grid method) |
ISO2409 |
GB/T9286-1998 |
0 |
|
|
Bending |
ISO1519 |
GB/T6742-1986 |
2mm |
3mm |
|
Pencil Hardness |
ASTMD3363 |
GB/T6739-1996 |
1H-2H |
|
|
Salt spray test |
ISO7253 |
GB/T1771-1991 |
>500 hours |
|
|
Damp heat test |
ISO6270 |
GB/T1740-1979 |
>1000 hours |
|
|
Heat resistance |
110°C/24 hours(white) |
Good gloss retention,E≤0.3-0.4 |
||
|
Florida weathering exposure |
ISO2810 |
South 45 °,12mons |
Gloss retention≥50% |
|
|
Artificial accelerated aging |
60°C/8hours + 50°C/4hours condensing,cycle for 500hours |
Gloss retention≥50% Color stability:E≤0.35 |
||
|
|
||||
|
Annotate: |
1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns. |
|||
|
2.The above coating performance may be lower as shiny and slightly lower. |
||||
The average theoretical coverage is approximately 8-10 m²/kg at a film thickness of 60 μm, calculated based on a 100% powder utilization rate.
Actual coverage may vary depending on workpiece shape, spraying equipment, recovery system, film thickness, and application conditions.
The product is packed in cartons with double inner polyethylene bags. The standard net weight is 25 kg per carton.
Store the product in a dry, clean, and well-ventilated warehouse below 30°C.
Keep away from fire sources, heat sources, direct sunlight, and moisture. Open-air storage is strictly prohibited.
Under proper storage conditions, the shelf life is 12 months. If the product has exceeded the shelf life, it should be re-inspected before use. If the test results meet the required standards, the product can still be used.
This product is a solvent-free powder coating. During handling and spraying, operators should avoid inhaling powder dust.
Operators are recommended to wear appropriate personal protective equipment, such as dust masks, protective goggles, and gloves if necessary.
Please refer to the latest SDS for detailed health and safety information.
10.Why Choose Our Products?
We have our own manufacturing factory, which allows us to better control product quality, production schedule, and cost. Factory-direct supply helps us provide customers with stable quality and competitive prices.
We carefully select raw materials and control the production process to ensure consistent product performance. Stable raw material quality is the foundation of reliable powder coating performance.
Trial orders and sample orders are welcome. We can provide samples for customer testing before bulk purchase, helping customers reduce purchasing risk at the initial cooperation stage.
Our powder coatings have been exported to Europe, America, Southeast Asia, and other countries and regions. Long-term export experience helps us better understand different market requirements and customer needs.
If you have any questions about product selection, application, testing, or order details, our team will provide timely support and do our best to help you find the suitable powder coating solution.
Please provide us with your detailed requirements or technical data, including:
We can provide FREE samples, coated panels, technical data sheets, and test reports according to your project needs.
Send us an inquiry today. Our team will help you find the right powder coating solution for your project.
){kind=link}