Pink Powder Coating, Pink Color Powder Coating, Glitter Pink Powder Coating manufacturer / supplier in China, offering Decorative Bright Glitter Pink Color Powder Coating Paint for Automobile/Bike/Bicykle/Motorcycle, Ral 7001 Grey Smooth Semi Gloss Powder Paint, Ral 7016 Grey Fine Structure Sandy Texture Powder Coating and so on.
|Min. Order:||100 kgs|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal|
|Main Raw Material:||Polyester or Polyurethane|
|Paint Film Property:||UV Resistant|
Decorative bright glitter pink color powder coating paint for automobile/bike/bicykle/motorcycle
Appearance:Homogeneous without any agglomerate
Specific Gravity:1.2~1.8 g/cm3(vary with the different type and color)
Granularity Distribution:100% smaller than125μm, including more than 85% among 60-90μm.
200°C (temperature of work piece ) 10 minute
Standard or Method
Impact Resistance Test
Adhesion Test (Cross cut )
Damp Hot Test
Facing south 45° 12month
Gloss retention :≥50%
60°C/8 h UV+50°C/4 h condensation,cycling500h
Note:1.The above-mentioned test adopt 0.8mm thick rust removal , degrease cold-rolled stencil plate , and the scribble membrane thickness is 50-70 microns
2.The index of performance applied membrane above may be slightly reduced with reducing of the gloss.
7-10 m2/kg, membrane thick is 60 μm(calculated as the 100% usage rate)
JINHU COLOR POWDER COATING CO.LTD has been experienced in producing the solid powder including The pure expoy powder coating/The pure polyester powder coating/The hybrid powder coating/The transparent powder coating etc.And the products can used outdoors and indoors via different resins.
The outdoor powder coating mainly made of polyester resin,always named heat resistance powder coating for its superior weatherability.
The outdoor powder coating must be stored in dry room with good ventilation ,with temperature lower than 35°C and should avoid direct sunlight.Prohibit to piling up in the open.Under this condition, the powder can be steadily maintained for one year, expired products still can be used provided testing results meet the utilization standards.