LPG Resistant Electrostatic Spray Powder Coating for Gas Cylinder

• Customization: Available
• CAS No.: 00-00-0
• Formula: 00-00-0
• Model NO.: RAL
• EINECS: 00-00-0
• Usage: Powder Coating, Metal Spray Powder Coating
• Color: Ral Colors or Pantone Colors
• Appearance: Powder
• Method: Spray
• Components: Resin, Pigment
• Main Raw Material: Epoxy Polyester
• Level: Finish Coat
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Steel, Iron, Copper and Other Metals
• Expiration Date: 1 year
• Formation Mechanism: N/a
• Packaging: Carton
• Color on Basis: Ral or Pantone Chart
• Gloss: Glossy, Semi Glossy or Matt
• Finish: Smooth or Texture
• Mark: Neutrial or Designed by Customer
• Gun: Electrostatic or Tribo
• Certificate: ISO, RoHS and SGS
• Factory: We Have Our Own Powder Coating Factory
• Application: Shelf, Fence, Fan, Security Door and Others
• Annual Export Quantity: 3, 000 Tons
• 1 Container: 19 Tons
• Transport Package: 25kgs/Carton
• Specification: RAL colors or Pantone colors
• Trademark: EV
• Origin: China
• HS Code: 1111111
• Production Capacity: 4000tons

Product Description

LPG resistant electrostatic spray powder coating for gas cylinder

Feature

This type LPG resistant powder coating used to electrostatic spray gas tank,gas por,gas cylinder and so on industry.This type powder coating have anti-LPG feature.

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity:24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	Pass H-2H
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91,500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T17740-79(89),1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313,500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

We offer free samples to you.

Contact informatoin:
Danae Ren
 

You can check our picture of our sample panels as follows,