Anti Gassing Electrostatic Powder Coating

• Usage: Powder Coating, Electrical Insulating Varnish, Boat Paint
• Method: Spray
• Level: Finish Coat
• Certification: ISO14001, RoHS, ISO9001
• Expiration Date: 2 years
• Curing: 180 D 15 Mins
• Gun: Electrostatic or Tribo
• Application: Shelf, Fence, Fan, Security Door and Others
• Finish: Wrinkle/Sanded/Netted/Crackle/Crocodile/Smooth/etc
• Gloss: Glossy, Semi Glossy or Matt
• Mark: Neutrial or Designed by Customer
• Certificate: ISO, RoHS and SGS
• 20′ Container: 19575kg
• Using: Shelf, Fence, Fan, Security Door and
• Transport Package: 25 Kg/ Carton 20 T/ 20′s Container
• Specification: 25* 25*38
• Trademark: EVER
• Origin: Nanjing
• HS Code: 3907000000
• Production Capacity: 4000 Tons / Year

Product Description

 RAL9016 Traffic White  Anti gassing electrostatic powder coating

More Detail information, contact with:

 

 By through a special additive into powder coating raw material, it can reduce the effect on appearance caused by gases or moisture released from a cast substrate during cure. A small amount 2%-4% of the additive is incorporated by post mixing, which can minimize the formation of bubbles in the coating surface
 

 

 

PRODUCTS

 

 

 

 

 

 

 

Anti gassing electrostatic powder coating

By through a special additive into powder coating raw material, it can reduce the effect on appearance caused by gases or moisture released from a cast substrate during cure. A small amount 2%-4% of the additive is incorporated by post mixing, which can minimize the formation of bubbles in the coating surface.

  

By through a special additive into powder coating raw material, it can reduce the effect on appearance caused by gases or moisture released from a cast substrate during cure. A small amount 2%-4% of the additive is incorporated by post mixing, which can minimize the formation of bubbles in the coating surface.

Anti gassing Powder Coating

By through a special additive into powder coating raw material, it can reduce the effect on appearance caused by gases or moisture released from a cast substrate during cure. A small amount 2%-4% of the additive is incorporated by post mixing, which can minimize the formation of bubbles in the coating surface.
Substrates: die cast aluminum, magnesium and other cast parts, galvanized metals, and porous substrates.
Note:  It typically reduces gloss by approximately 10 units. At elevated cure temperatures, a waxy film may appear on the surface, but can be easily removed. This additive may interfere with adhesion of silk-screening inks, labels and may cause an unusual appearance in metallic effect powder coatings. Therefore, pre-testing is always recommended.

 

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity:24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
 

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

 

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

 

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	Pass H-2H
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91,500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T17740-79(89),1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313,500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

We offer free samples to you.

6 . FAQ
(1) What powder we can manufacture?
We can do almost all the RAL and PANTONE colors; 
We can do almost all the finish powder, like smooth, texture, structure etc. 
We can do a lot of special powders, like conductive powder, Insulation powder, Soft touch powder, Anti-graffitti powder, Zinc-Rich powder, super thin powder etc.
(2) Our Packing: 25kg / box    
                             Box Size: 40 * 25 * 33 cm (L * W * H)       
                             Pallet size: 1.1 * 1.16m Material: Plywood
(3) Our MOQ: Usually 200kg/ Color
(4) Delivery Time: Usually send out the goods within 1~ 15 days.
(5) Can we get some samples from you? 
      Yes, we can supply you 1-2 kg powder samples for your testing, but we need       you to pay the freight firstly. 
(6) How can we get the quotation?
Please send us your technical data or let us know your requirement as following: Color, Powder Type, Gloss, Surface and other performance requirements