Galvanized Steel Ral9006/Ral9022/Ral9007 Metallic Sparkle Oudoor Use Silver Powder Coating

• CAS No.: 00-00-0
• Formula: 00-00-0
• EINECS: 00-00-0
• Usage: Powder Coating
• Color: Every Color
• Appearance: Powder
• Model NO.: RAL9006
• Method: Spray
• Components: Resin,Pigment, Additive etc...
• Main Raw Material: Epoxy Polyester Resin
• Level: Finish Coat
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Steel, Iron, Copper and Other Metals
• Expiration Date: 1 year
• Formation Mechanism: Non Conversion Type
• Packaging: Carton
• Smooth Thickness: 60-90um
• Hardness: 1h-2h
• adhesive: 0 Class
• Gloss: 5%-99%
• Transport Package: 25kgs/Carton
• Specification: 25kgs/carton
• Trademark: EVER
• Origin: China
• HS Code: 1111111111
• Production Capacity: 5000tons

Product Description

Galvanized Steel RAL9006/RAL9022/RAL9007 Metallic Sparkle Oudoor Use Silver Powder Coating

This series is metallic finish powder coatings with highly decorative finishes available in any of chemistry types e.g. epoxy, polyester and epoxy-polyester. To preserve the decorative appearance of polyester-based metallic finishes for outdoor use,a clear topcoat is highly recommended.
 
Bonded (FH-MP-B) and dry blending (FH-MP-D)metallic powder have very different properties during application .Both of them are optional according to your requirement .

GLOSS AND COLOR RANGE                                                                

1. Gloss levels range from matt to high gloss depending on the chemistry system. 
2. Smooth, flat metallics or sparkling metallics are available.
3.  is matched upon request , no full color range is available.

APPLICATION SCHEDULE                                                                  

1. pplied by electrostatic spraying gun that can provide negative tension of 60-80 kV.
2. uring schedule : 180-200ºC /10-15 minutes depending on the powder chemistry system.
3. Optimal film thickness : 60 -90 um 

 
The metallic finish obtained depends on the coating thickness. Excessively thin or thick films will not give a satisfactory finish. 
 

Bonded Metallic Powder (FH-MP-B)	Dry Blending Metallic Powder (FH-MP-D)
Base powder and metallic pigments does not be divided	Base powder and metallic pigments can be divided
Can use after reclaimed Reclaim to virgin powder ration be kept as low as possible	Can not use after reclaimed Tends to separate from the power during application
High Metallic Effect	Low Metallic Effect
A little bit expensive	Cheaper than Bonded Metallic Powder
No defects on a coated film	Defects(spit, lump etc.) on a coated film
Rejection ration Below 5%	Rejection ration 30~40%
Metallic Powder had been combined with base powder	Base powder and metallic powder have been detached

SUBSTRATES AND PRE-TREATMENT                                                       
Applied to the following substrates after the appropriate cleaning and conversion coating.

1. Ferrous metals(cold rolled steel, cast iron etc.): Iron or zinc phosphatation
2. Zinc surfaces(galvanized steel, zinc alloy) : Chromatation or zinc phosphatation
3.  alloys : Chromatation

You can check our picture of our sample panels as follows,