Lemon Green Polyester Powder Coating for Outdoor Metal Furniture

Product Description

Lemon Green Polyester Powder Coating for Outdoor Metal Furniture


 

1.General introduction:

  Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed  and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.
 
2.Feature:
           
1).The products are non-toxic, solvent-free and non-toxic volatile substances,
there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws. 
2).Raw material utilization is high, the highest utilization rate even more than
99%. 
3).After being pre-coated handle, disposable construction, without primer,
you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs. 
4).Dense coating adhesion, good impact strength and toughness, high
coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties. 
5).Powder coatings storage and transport are safety and convenience.
   
3.Product series: 
   
  The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.
 
4.Powder physical properties: 
 
   Proportion : 1.2-1.8 (depending on the color and gloss ) .
 
   Particle size distribution: 100% less than 125 microns (more than 85%          
   between 60 to 90).

   Liquidity(180°C):22~35mm.

   Curing conditions:200°C,10 minutes.

5.Average coverage:

8-10m³/kg, the membrane is 60μm
(calculate by 100% utilization rate of powder coating).

6.Packing:

   Carton packaging, lined with double polyethylene bag, net weight 20 kg.
   
7.Storage requirements:

   Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

8.Health and safety:
 
  This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear  appropriate dust mask and glasses.
 
9.Coating performance
 

Coating performance
Test items	Inspection standards		Test indicators
			High light	Glazed/Matte/Low light
Impact resistance	ISO6272	GB/T1732-1993	50kg/cm	40kg/cm
Cupping test	ISO1520	GB/T9753-1988	8mm	7mm
The adhesion (grid method)	ISO2409	GB/T9286-1998	0
Bending	ISO1519	GB/T6742-1986	2mm	3mm
Pencil Hardness	ASTMD3363	GB/T6739-1996	1H-2H
Salt spray test	ISO7253	GB/T1771-1991	>500 hours
Damp heat test	ISO6270	GB/T1740-1979	>1000 hours
Heat resistance	110°C/24 hours(white)		Good gloss retention,E≤0.3-0.4
Florida weathering exposure	ISO2810	South 45 °,12mons	Gloss retention≥50%
Artificial accelerated aging	60°C/8hours + 50°C/4hours condensing,cycle for 500hours		Gloss retention≥50%                         Color stability:E≤0.35
Annotate:	1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
	2.The above coating performance may be lower as shiny and slightly lower.

10.Why choose our products?

1). We have our own factory. The good quality and the competitive is the advantage of our company. 
2). The material we choose is always good and products always come out with high quality. 
3). A trial order or sample orders are welcomed. 
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world. 
5). We will do our best to service you all the time if you have the further question. 

 

 

11. Our services:

1. Purchase Service
Ever  COATING has a specialized and efficiency working team. If you are new on the coating, some pictures or drawings of your products and workshop could be show to us will be appreciated , we will give you specialized suggestion of whole work .

2. Shipping Service
Ever  COATING has a specialized and independent department which just for shipping the buyer's goods .The workers know T/T, L/C  Paypal, Westuion Items well. All Exported documents could be made perfectly . We cooperate with the most famous shipping company in China also. They could provide the best and economic shipping ways to the buyer's port.

3. Free Sample Service
Ever Coating provide with free sample service.

4. OEM Service
Ever COATING can accept the buyer   their own  trademark.

5. After Sales Service
Ever Coating provide Two year warranty period.
Ever COATING have lots agent in the world. When happen problem, technical team will fly to the local place to service.

12. FAQ

(1) What powder we can manufacture?
We can do almost all the RAL and PANTONE colors; 
We can do almost all the finish powder, like smooth, texture, structure etc. 
We can do a lot of special powders, like conductive powder, Insulation powder, Soft touch powder, Anti-graffitti powder, Zinc-Rich powder, super thin powder etc.
(2) Our Packing: 25kg / box    
                             Box Size: 38 * 27 * 33cm (L * W * H)       
                             Pallet size: 1.1 * 1.16m Material: Plywood
(3) Our MOQ: Usually 200kg/ color
(4) Delivery Time: Usually send out the goods within 15 days.
(5) Can we get some samples from you? 
      Yes, we can supply you 1-2 kg powder samples for your testing, but we need       you to pay the freight firstly. 
(6) How can we get the quotation?
Please send us your technical data or let us know your requirement as following: Color, Powder Type, Gloss, Surface and other performance requirements.