Antique Copper/Silver/Gold/Brass/Bronze Hammer Texture Pure Polyester Powder Coating

Product Description

Antique Copper/Silver/Gold/Brass/Bronze Hammer Texture Pure Polyester Powder Coating

 

Powder coating is a new type of 100% powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.

Most powder coating is used by electrostatic spraying on the metal surface, and then cure in oven, eventually form a solid layer.
 

Applications of Product/powder coating powder paint

♦MetalIron Door	♦Metal Furniture
♦Air Condition machine	♦Electric Fan
♦Racking System	♦Electrical Cabinet
♦Aluminium Extrution/Profile	♦Exterior Chain link Fence
♦Oil Tank	♦Electric vehicle battery box
♦Signal tower	♦Electric Transformer

Our service
1. OEM Manufacturing available: Product, packing with carton
2. Sample available
3. We will reply you for your inquiry within 24 hours.
4. After sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.

COLORS AVAILABLE

• RAL colors coating powder
• Pantone colors
• Color- matching regarding customer requirement is available

GENERAL TYPES

• Epoxy Polyester / Hybrid powder coating
• Pure Polyester Powder Coating
• Pure Epoxy Powder coating/FBE powder coating
• Metallic powder coating
• Hammer tone finish color powder coating
• Texture color powder coating powder(We often export RAL 7032,RAL 7035,RAL7040,RAL 7042 ,RAL 2004 ,RAL 9005 , RAL 3020 fine texture )

Textures include sand grain, hammer, silk pattern, sand textured, metallic, vary colors powder coating

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.5g/cm3 up to defferent colors
• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity:24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature) for 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60-80 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight and 25 kg net weight.

Powder Coating Application
Powder Coating for aluminium extrusion
Powder Coating for racking system
Powder Coating for cabinet
Powder Coating for gas cylinder
Powder Coating for metal fence
Powder Coating for furniture

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

 

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

 

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	1H-2H
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91,500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T17740-79(89),1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313,500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

We offer free samples to you.