| Customization: | Available |
|---|---|
| CAS No.: | 00-00-00 |
| Formula: | 00-00-00 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
COLORS AVAILABLE
GENERAL TYPES for powder coating
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color etc
We often export RAL 1018,RAL 7032,RAL 7035,RAL 7042 ,RAL 2004 ,RAL 9005 , RAL 3020,RAL 1033 fine texture
PHYSICAL PROPERTIES for powder paint
CURING CONDITIONS
180 °C ~ 200 °C (workpiece surface temperature), 10-15 minutes or on base of customer's requirement
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60-90 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 50 kg net weight.
Powder Coating Application
Powder Coating for aluminium extrusion
Powder Coating for racking system
Powder Coating for electric cabinet
Powder Coating for gas cylinder
Powder Coating for exterior fence
Powder Coating for metal furniture
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 12 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
| Introduction: |
This series of products are mainly made of saturated polyester resin and acrylic resin.
|
| Feature: | Gloss can reach 2-5%(60 soft and comfortable Good flowing property,smooth appearance and flat handle Suitable for long-term outdoor usage Good impact resistance Good resistance to baking-yellowing Reasonable price and low cost |
| Uses: | Outdoor lighting Housing facilities Building materials Other outdoor low-glossy coating |
| Apply Condition: |
Outdoor glossless powder coatings are specially suitable for coating following equipment: |
| Corona electrostatic spray coating Electrostatic-fluidized bed painting Fluidized bed Triboelectrification coating |
|
| Thickness: |
40~150μm,recommended thickness is 50~80μm. |
| Baking conditions: | See the following chart |
| Physical Property: | |
| S.G | 1.4-1.8g/cm3(ingredient&color demand) |
| Granularity Distribution: | standard:average granularity is 35-40μm,<10μm powder<10%, >90μm powder<0.5%. |
| Coating Film Property: | All the tests are using 0.8mmcold rolling sheet,Thickness: 50-80μm. |
| Mechanical properties: | |
| Pencil hardness | GB/T 6739-1996 H-2H |
| Adhesion(cross-cut) | GB/T 9286-1998 0 grade |
| Bend test | GB/T 6742-1986 ≤2mm |
| Impact strength test | GB/T 1732-1993 ≥50kg.cm |
| Cupping test | GB/T 9753-1988 ≥6mm |
| Corrosion resistance: | |
| Salt fog test | GB/T 1771-1991 >500h |
| Humid heat test | GB/T 1740-1979 >1000h |
| Temperature resistance | 100ºC/48h (white anel) color retention E≤0.6 |
| Weather resistance | Accelerated light aging testQUV-B313 (240h,8h/60ºC lighting,4h/50ºC rain) GB/T14522-1993 gloss retention rate≥80%,no change with color. |
| Packing: | Double PP bags, N.W 20kg/carton |
| Storage: | 12 months within 30ºC,avoid direct sunlight. |
| Health and Safety: | Refer to the MSDS. |
| Color Table: | |
){kind=link}