| Customization: | Available |
|---|---|
| Usage: | Powder Coating |
| Color: | Ral Color |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Introduction: |
This series of Special Powder Coatings For Aluminum Wheel-Hub is designed by our company for inner wheel-hub protection and surface vanish. It has the features of smooth appearance, strong adhesion and good resistance to salt spray. Our products have been widely adopted in domestic market.
|
| Feature: | It has the fetures of smooth appearance, strong adhesion and good resistance to salt spray. |
| Uses: | For the purpose of inner wheel-hub protection and surface vanish, this series of Special Powder Coatings For Aluminum Wheel-Hub is specially designed to meet customer's needs ofdifferent products and specialities. |
| Series of Product: | |
| 1,Clean Powder Coatings | Super-high transparent pure polyester powder coatings(Latest product) Standard transparent pure polyester power coatings Transparent pure polyester power coatings |
| 2,Base Powder | Pure Polyester Base Powder Super-high Leveling polyester/Epoxy Mixed Base Powder (Lastest Product) High Leveling polyester/Epoxy Mixed Base Powder Low gloss polyester/Epoxy Mixed Base Powder |
| 3,Special Function Products | Breathing powder coatings Electrostatic shield resistance powder coatings |
| Apply Condition: | This series of Special Powder Coatings For Aluminum Wheel-Hub is designed by our company for inner wheel-hub protection and surface vanish. |
| Physical Property: | |
| S.G | 1.2-1.8g/cm3(as per ingredient&color demand) |
| Granularity distribution | average granularity is 35-40μm,<10μm powder<10%,>90μm powder<0.5%. |
| Coating Film Property: | All the tests use 0.8mm deoiling derusting cold-rolled steel sheets, with the film thickness between 50 to 80 μm. |
| P.P. Clean Powder | |
| Mechanical properties: | |
| Pencil hardness | GB/T 6739-1996 H-2H |
| Adhesion(cross-cut) | GB/T 9286-1998 0 grade |
| Bend test | GB/T 6742-1986 1mm |
| Impact strength test | GB/T 1732-1993 ≥50kg.cm |
| Cupping test | GB/T 9753-1988 ≥8mm |
| Corrosion resistance: | |
| Salt fog test | GB/T 1771-1991 No effects, and the corrosion width of cross-cut is smaller than 2mm |
| Humid heat test | GB/T 1740-1979 >1000h slight blinding |
| Weather resistance | accelerated light exposure test QUV-B313(240h,8h/60ºC lighting,4h/50 condensation)GB/T 14522-1993 Gloss retention rate≥80%,no change with color |
| Base Powder | |
| Mechanical properties: | |
| Pencil hardness | GB/T 6739-1996 H-2H |
| Adhesion(cross-cut) | GB/T 9286-1998 0 grade |
| Bend test | GB/T 6742-1986 ≤2mm |
| Impact strength test | GB/T 1732-1993 ≥50kg.cm |
| Cupping test | GB/T 9753-1988 ≥7mm |
| salt fog test | GB/T 1771-1991 >500h,No effects, and the corrosion width of cross-cut is smaller than 2mm |
| Humid heat test | GB/T 1740-1979 >1000h,slight blinding |
| Packing: | Double PP bags, N.W 20kg/carton |
| Shelflife: | 12 months within 30ºC,avoid direct sunlight. |
| Health and Safety: | Refer to the MSDS. |
| Color Table: | |
){kind=link}