Ral 2002 Red Color Powder Coating Paint for Metal Tube

Product Details
Customization: Available
Usage: Powder Coating, Metal Spray Powder Coating
Color: Ral Colors
Manufacturer/Factory, Trading Company

360° Virtual Tour

Diamond Member Since 2008

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Plant Area
>2000 square meters
Management System Certification
ISO 9001, ISO 14001
  • Ral 2002 Red Color Powder Coating Paint for Metal Tube
  • Ral 2002 Red Color Powder Coating Paint for Metal Tube
  • Ral 2002 Red Color Powder Coating Paint for Metal Tube
  • Ral 2002 Red Color Powder Coating Paint for Metal Tube
  • Ral 2002 Red Color Powder Coating Paint for Metal Tube
  • Ral 2002 Red Color Powder Coating Paint for Metal Tube
Find Similar Products

Basic Info.

Method
Spray
Components
Pigment
Main Raw Material
Polyester
Level
Finish Coat
Certification
ISO14001, RoHS, ISO9001
Substrate
Steel
Expiration Date
1 year
Application
Electrostatic Spraying
Colors
Ral Color
Powder System
Polyester
Curing Condition
180-200c/ 10-20minutes
Transport Package
25kg/Carton
Specification
SGS
Trademark
EVER
Origin
China
Production Capacity
100t/Month

Product Description

Ral 2002 Powder Coating Paint for Metal Tube
  

1.General introduction:

  Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed  and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.
 
2.Feature:
           
1).The products are non-toxic, solvent-free and non-toxic volatile substances,
there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws. 

2).Raw material utilization is high, the highest utilization rate even more than
99%. 

3).After being pre-coated handle, disposable construction, without primer,
you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs. 

4).Dense coating adhesion, good impact strength and toughness, high
coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties. 

5).Powder coatings storage and transport are safety and convenience.
   
3.Product series: 
   
  The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.
 
4.Powder physical properties: 
 
   Proportion : 1.2-1.8 (depending on the color and gloss ) .
 
   Particle size distribution: 100% less than 125 microns (more than 85%          
   between 60 to 90).

   Liquidity(180°C):22~35mm.

   Curing conditions:200°C,10 minutes.

5.Average coverage:

8-10m³/kg, the membrane is 60μm
(calculate by 100% utilization rate of powder coating).


6.Packing:

   Carton packaging, lined with double polyethylene bag, net weight 20 kg.
   
7.Storage requirements:

   Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

8.Health and safety:
 
  This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear  appropriate dust mask and glasses.
 
9.Coating performance
 
Coating performance
Test items Inspection standards Test indicators
High light Glazed/Matte/Low light 
Impact resistance ISO6272 GB/T1732-1993 50kg/cm 40kg/cm
Cupping test ISO1520 GB/T9753-1988 8mm 7mm
The adhesion (grid method) ISO2409 GB/T9286-1998 0
Bending ISO1519 GB/T6742-1986 2mm 3mm
Pencil Hardness ASTMD3363 GB/T6739-1996 1H-2H
Salt spray test ISO7253 GB/T1771-1991 >500 hours
Damp heat test ISO6270 GB/T1740-1979 >1000 hours
Heat resistance 110°C/24 hours(white) Good gloss retention,E≤0.3-0.4
Florida weathering exposure ISO2810 South 45 °,12mons Gloss retention≥50%
Artificial accelerated aging 60°C/8hours + 50°C/4hours condensing,cycle for 500hours Gloss retention≥50%                         Color stability:E≤0.35
 
Annotate: 1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
  2.The above coating performance may be lower as shiny and slightly lower.



Ral 2002 Red Color Powder Coating Paint for Metal Tube

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier