Antique Hammerstone Effect Electrostatic Spray Powder Coating Paint Antique Red Gold/ Antique Green

Product Description

Contact Information

Ms. Summer Yang | Sales Manager
 
Jinhu Color Powder Coating Co., Ltd.
Room 3-3102 | No.56 Lingzhi Road | Xinghe World | Nanjing 210028 | China
 
 

Red copper surface antique effect electrostatic spray powder coating paint

Hammer tone texture powder coating is an advanced method of applying a decorative and protective finish. This type of powder coating provide excellent toughness, durability, thickness and decorative effect. This textured surface is more resistant to abrasion, chipping, scratching, fading, chemical corrosion and wearing than other finishes. It will seal the trailer well from the corrosive action of harsh environment conditions. It is the longest lasting and most color-durable quality finish. Colors stay bright and vibrant longer. It is also designed for hiding surface imperfections. Now you can have excellent performing finish that not only does the job but also looks great.

Weather Resistant TGIC Polyester Powder Coatings for Exterior and Interior Application.
Features:	Good weather resistance, good mechanical properties, very smooth flow, good storage stability, good coverage.
Gloss Level:	All colors featured in this chart are available as standard products in smooth glossy with a gloss level of 80-90+
Typical Applications:	Residential windows and doors, garden equipment, patio furniture, automotive accessories, bicycles, motorcycles, sporting goods.
Highly Weather- and UV-Resistant Powder Coatings based on Super                           Durable TGIC Polyester for Exterior and Interior Applications.
Features:	Superior gloss and color retention, excellent weather  resistance, good mechanical properties, superior chalk resistance, smooth flow, excellent edge coverage, good storage stability.
Gloss Level:	All colors featured in this chart are available as standard products in smooth glossy with a gloss level of 80-90.
Typical Applications:	Agricultural and construction equipment, bus shelters, lighting fixtures, playground equipment, site furnishings, garage doors, stadium seating, fencing, automotive equipment, and  marine applications.

 

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

 

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	Pass H-2H
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91,500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T17740-79(89),1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313,500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

We offer free samples to you.

You can contact me informatoin as follows