Electrostatic Spray Pure Polyester Antique Silver Powder Coating Paint

• Customization: Available
• CAS No.: 00-00-0
• Formula: 00-00-0
• Model NO.: electrostatic spray
• EINECS: 00-00-0
• Usage: Powder Coating, Metal Spray Powder Coating
• Color: Ral Colors or Pantone Colors
• Appearance: Powder
• Method: Spray
• Components: Resin, Pigment
• Main Raw Material: Epoxy Polyester
• Level: Finish Coat
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Steel, Iron, Copper and Other Metals
• Expiration Date: 1 year
• Formation Mechanism: N/a
• Packaging: Carton
• Color on Basis: Our Panels or as Customer′s Requirement
• Gloss: Glossy, Semi Glossy or Matt
• Finish: Smooth or Texture
• Mark: Neutrial or Designed by Customer
• Gun: Electrostatic or Tribo
• Certificate: ISO, RoHS and SGS
• Factory: We Have Our Own Powder Coating Factory
• Application: Shelf, Fence, Fan, Security Door and Others
• Annual Export Quantity: 3, 000 Tons
• 1 Container: 19 Tons
• Transport Package: 25kgs/Carton
• Specification: RAL colors or Pantone colors
• Trademark: EV
• Origin: China
• HS Code: 1111111
• Production Capacity: 4000tons

Product Description

Electrostatic Spray Pure Polyester Antique Silver Powder Coating Paint

Introduction
antique finish powder coatings with highly decorative finishes consisting of a base color with a vein pattern of a distinctly different color.The base color is usually black,white or other colors.The vein pattern could be metallic(silver,gold or copper).To preserve its decorative appearance,clear topcoat is highly recommended for indoor or outdoor use.

Using method

1. pplied by electrostatic spraying gun that can provide negative tension of 60-80 kV.
2. uring schedule : 180-200ºC /10-15 minutes depending on the powder chemistry.
3. Optimal film thickness : 80 -110 um 

SUBSTRATES AND PRE-TREATMENT
Applied to the following substrates after the appropriate cleaning and conversion coating. 

1. Ferrous metals(cold rolled steel, cast iron etc.): Iron or zinc phosphatation
2. Zinc surfaces(galvanized steel, zinc alloy) : Chromatation or zinc phosphatation
3.  alloys : Chromatation

COLORS AVAILABLE

• RAL colors coating powder
• Pantone colors
• Color-matching regarding customer requirement is available

GENERAL TYPES

• Polyester /Hybrid powder coating
• Epoxy Powder coating color
• Metallic powder coating color
• Hammer tone color powder coating
• Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity:24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	Pass H-2H
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91,500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T17740-79(89),1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313,500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

We offer free samples to you.

You can contact me informatoin as follows,
Attn:Danae