| Customization: | Available |
|---|---|
| CAS No.: | 00-00-0 |
| Formula: | 00-00-0 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Anti Corrosion Zinc Rich Pure Epoxy base Powder Coating
Details:
This is an epoxy-based smooth satin coating with a high level of zinc, providing excellent corrosion protection while improving the adhesion properties of powder topcoats resulting in superior service life and film integrity. It is not recommended for exterior use without a topcoat,typically used for garden tools,industrial waste equipment,agricultural machinery, pipeline coatings, electrical switch gear,cabinets and cable ducting.
Properties:
It is higher average specific gravity than standard powder coatings, therefore box feeders and
fluidizing hoppers will need to be tested to ensure adequate mixing. It may require increased air pressure
or vibration levels than standard powder coatings.
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25kg net weight.
GENERAL TYPES
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
PHYSICAL PROPERTIES
| No. | Item | Index | Testing Result |
| 1 | Appearance (visual ) | Homogeneous color without any agglomerate |
Homogeneous color without any agglomerate |
| 2 | (GB/5237-2000) Appearance of film |
Smooth | Smooth |
| 4 | (GB/T9761-88) Color |
similar color | similar color |
| △E<0.5 | 0.3 | ||
| 6 | (GB/T1732-93) Impact resistance |
50kg.cm direct pass | 50kg.cm direct pass |
| 7 | (GB/T6739-86) Pencil hardness |
1H-2H | 1H pass |
| 8 | (GB5237-2000) Adhesion (cross cut test ) |
O-1 level | O level pass |
| 9 | (GB/T6742-86) Bending test (tapering spindle) |
3mm | 3mm pass |
| 10 | (GB/5237-2000 ) Ericshen |
6mm | 6mm pass |
| 11 | (PSD) | 40-60 | 40 |
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer free samples to you.
You can contact me informatoin as follows,
Attn:Danae
){kind=link}