Wood Effect Finish Sublimation Heat Transfer Base Color Powder Coating

Product Description

Wood Effect Finish Sublimation Heat Transfer Base Color Powder Coating

Used tools & products
Spray Gun,Curing Oven & Heat transfer machine
Powder coating & Wood effect paper or film

Process
1. Electrostatic spraying powder coating on the metal products
2.Curing in the oven
3.Use heat transfer machin to transfer the wood effect paper or film on the finish metal products

Application
Used for furnitures,metal doors & so on products

DESCRIPTION

• Sublimation powder coating is also called Heat Transfer Powder Coating because of the process of heat transfer printing.This process is a sublimation process,which is a phisycal-chemical transition of a pattern from transfer paper or film to a substrate which is pre-coated with a special powder designed to be as the base color of this sublimation.
• Through this sublimation process countless effects and patterns such as woodgrain, marble, granite, fancies, pictures can be transferred on substrate surfaces.
• This series is available in a variety of color, gloss, finishes and shapes.
• The coating is flexible and non-sticky paper, so that the prefabricated steel could be coated with this products before post-forming.
• To learn more about this application process,please refer to Heat Transfer Process.

POWDER CHARACTERISTIC

• Chemistry: Epoxy Polyester/Polyester / Polyurethane
• Particle size: Suitable for electrostatic spraying
• Specific gravity: 1.2-1.7g/cm³ up to colors
• Curing schedule(object temp.): 180ºC/10-15minutes;200ºC/6-10minutes;
• Storage: Dry ventilation conditions below 30ºC
• Shelf life: 12months

APPLICATION AREA

• Furniture
• General Industry
• Architecture Construction

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	Pass H-2H
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91,500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T17740-79(89),1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313,500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

We offer free samples to you.

You can contact me informatoin as follows,
Attn:Danae