| Customization: | Available |
|---|---|
| CAS No.: | 00-00-0 |
| Formula: | 00-00-0 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Anti Corrosion Zinc Rich Pure Epoxy Powder Coating
Equipment used:
Electrostatic gun
Details:
This is an epoxy-based smooth satin coating with a high level of zinc, providing excellent corrosion protection while improving the adhesion properties of powder topcoats resulting in superior service life and film integrity. It is not recommended for exterior use without a topcoat,typically used for garden tools,industrial waste equipment,agricultural machinery, pipeline coatings, electrical switch gear,cabinets and cable ducting.
Properties:
It is higher average specific gravity than standard powder coatings, therefore box feeders and
fluidizing hoppers will need to be tested to ensure adequate mixing. It may require increased air pressure
or vibration levels than standard powder coatings.
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25kg net weight.
Specific.
| Film Property | |||
| Testing items | Standards and Methods | Test Index | |
| Impact Strength | ISO 6272 | GB1732-1993 | >50kg/cm |
| Bending Resistance | ISO 1519 | GB/T6742-1986 | ≤2mm |
| Adhesion | ISO 2409 | GB/T9286-1998 | 0-1 grade |
| Cupping Test | ISO 1520 | GB9753-1988 | ≥7mm |
| Pencil Hardness | ASTM D3363 | GB/T6739-1996 | 1H-2H |
| Salt spray Test | ISO 7253 | GB/T1771-1991 | ≥500 hours |
| Hot & Humidity Test | ISO 6270 | GB/T17740-1979 | ≥1000 hours |
| Weatherability | ASTM G151 | GB/T1865-1997 | 240h(QUV B313) |
| Heat Resistance(Outdoor Use) | 100C/24h(white) | E<0.3-0.4 | |
| Application | ||
| Epoxy-polyester(Indoor use) | Pure Polyester(Outdoor use) | Pure Epoxy(Indoor use) |
| ~Housing furniture | ~ steel,pipe, valves | ~ Apparatus casing |
| ~ Household appliance | ~ Agricultural machinery | ~ Furniture |
| ~ Industrial equipment | ~ Automobile components | ~ Goods shelf |
| ~ Gymnastic facilities | ~ Machinery | ~ Office supplies |
| ~ Toys | ~ Electrical equipment | ~ Antitheft door |
| ~ Store shelves | ~ Bicycle | ~ Industrial equipment |
GENERAL TYPES
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
PHYSICAL PROPERTIES
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer free samples to you.
You can contact me informatoin as follows,
Attn:Danae
){kind=link}