| Customization: | Available |
|---|---|
| Usage: | Powder Coating, Metal Spray Powder Coating |
| Color: | Ral Colors or Pantone Colors |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
RAL9005 Black Color Insulation Powder Coating Paint
Product detail:
|
Product Details |
|
|
Type |
Epoxy Powder Coating; Polyester Powder Coating; Epoxy-Polyester Powder Coating |
|
Color |
RAL & Pantone color |
|
Surface Finish |
smooth & texture |
|
Gloss level |
High gloss |
|
Particle Size |
Average 32-42μm |
|
Specific Gravity |
1.2-1.7g per cubic meter |
|
Coverage |
8-10 square meters per Kg at 30-90 μm film thickness |
|
film thickness |
smooth:60-90μm,texture 90-130μm |
|
Application Recommendation |
|
|
Application Voltage |
60-90 KV |
|
Gun to Component Distance |
15-30CM |
|
Curing Temperature |
180-200ºC,10 min-15 min |
|
Powder coated Film Mechanical Properties |
|
|
Adhesion |
Cross-cut(2mm),no loss of adhesion |
|
Impact Resistance |
Direct impact 50kg/cm |
|
Pencil Hardness |
1H-2H |
|
Cupping Test |
6mm Mandrel |
|
Bending Test |
5mm |
|
Powder Coated Film Chemical Resistance |
|
|
Salt Spray Test |
5% NaCl Solution for 500 hours - No change |
|
Acid Resistance |
5% HCL for 240hours dip test - No change |
|
Alkali Resistance |
3% NaOH for 240 hours dip test - No change |
|
Storage Stability |
|
|
Store in ventilated, dry, clean room, temperature < 25ºC |
|
|
Relative humidity 50-65% |
|
|
Away from direct sunlight, fire, heat |
|
|
For best performance, use within 6 months |
|
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer free samples to you.
){kind=link}