Customization: | Available |
---|---|
CAS No.: | 00-00-0 |
Formula: | 00-00-0 |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Qualicoat Class 1 Powder Coating Paint Manufacturer for aluminium extrrusion profile
Powder Coating Description:
Hybrid powder coating is a thermosetting powder coating based on epoxy polyester resin with excellent smooth glossy and good flow-out finishes. Its outstanding overbake yellowing resistance and mechanical properties make it a wide range of indoor applications,e.g.domestic appliances, home and office furniture, racking system,machinery, ceiling panels,fan,cabinet, switchboards etc.
Gloss and Color Range
Gloss levels range is:
5%-99% and above depending on the end requirement .
Full color range isavailable.
Pure Polyester Powder Coating Function:
· Racking industry: storage rack,supermarket rack,pallet rack,racking system etc
· Metal furniture: Steel furniture, documents cabinets etc.
· Aluminium extrusion: Aluminium extrusion,Aluminium profile,Aluminium products etc
· Gas sylinder:Gas cylinder,gas tank etc
· Electrical industry: Electric cabinet, Electric panel etc
.Metal door:Iron door,steel door,security door,rolling shutter door
Powder Coating gloss,appearance finish and curing:
· Defferent types of art textures, such as sandy, wrinkle, fine texture, hammer tone, metallic effect,wood effect etc.
Physical Feature:
Specific gravity: 1.2-1.5g/cm3 (varied with different color and gloss)
Particle size: average 10~38um, proportion 10~84um > 90%, it can be adjusted if special requirement is put forward to us in advance.
APPLICATION SCHEDULE
Applied by : Electrostatic spraying devices
Curing schedule :15 minutes at 180ºC(metal temperature ) or by customer's requirement.
Optimal film thickness :
60 - 90 um for smooth powder coating
70-100um for sand texture powder coating
150um-350um for hammer texture powder coating
Pre treatment:
The overall quality of the coating system is largely dependent on the type and quality of the pre treatment. The recommended types of pre treatment for the most frequently used substrates are:
Aluminium |
Chromate conversion |
Steel |
Zinc phosphate |
Zinc coated steel |
Zinc phosphate or chromate conversion |
Average Coating Rate:
A. Smooth Surface:
6-12/KG, film thickness 60μm (calculated according to 100 consuming of powder coating)
B. Texture Surface:
5-7/KG,film thickness is about 80-120μm
Film Performance:
Test Item |
Test standard and Method |
Test index |
|
Impact resistance |
GB/T 1732 -1993 |
ISO6272 |
50kg·cm |
Adhension(cross-cut) |
GB/T 9286 - 1998 |
ISO2409 |
Class 0 |
Flexibility |
GB/T 6742-1986 |
ISO1519 |
2mm |
Pencil hardness |
GB/T 6739-1996 |
ISO2815 |
1H-2H |
Cupping test |
GB/T 9753-1988 |
ISO1520 |
6mm |
Salt spray resistance |
GB/T 1771-1991 |
ISO7253 |
>500 Hours |
Heat & humidity resistance |
GB/T 1740-1979 |
ISO6270 |
>500 Hours,film gloss slightly lose |
Note: 1. Above test are using 0.30mm thickness degreased, rust removed cold rolling steel plate, film thickness is 60-80um. 2. Film performance may slightly decrease with gloss decrease. |
Storage and Shipment of the powder coating:
Store in ventilated, dry and clean room with temperature below 25ºC, Keep it away from fire, heat,and direct sunlight. Outdoor stacking is prohibited. Avoid rains and exposure to sunshine during shipment.
Health and Safety of the powder coating:
The bulk powder paint is no hazardous ingredients contained. Wearing anti-dust mask and goggles to avoid inhalation of dust. Try best to avoid longtime contact with powder. The coating adhesive to the skin can be washed with soap.
FAQ:
1. Where is your company?
Our office is located in City Nanjing, Province Jiangsu, China. and our factory is located in City Huai'an, Province Jiangsu China.
2. Trading company or manufacturer?
We are directly powder coating manufacturer in China for 30 years.
3. What kinds of products do you have?
We are experts in the production of thermosetting powder coatings, producing powder coatings of various colors and textures.
4. Powder Coating Price:
Price depends on the color, texture and application (Indoor use or outdoor use). Also the price is negotiable. It can be changed according to your quantity. When you are making an inquiry, please let us know the quantity you want.
5. Sample:
1kg powder coating sample is available for each color for your testing. Sample is free, we would highly appreciate it if you pay for the air freight.
6. MOQ:
Each color ≥ 200 kg.
7. Warranty:
We are very confident in our products, and we pack them well, so usually you will receive your order in good condition. Any quality issues, we will deal with it immediately.