We offer a full range of polyester powder coatings suitable for outdoor applications such as architectural metalwork, signage, street furniture and other applications that require light and weather resistance.
Typical applications include:
Shop Signs
Gates & Railings
Motorbike Wheels
Security Grills
Garden Tables & Chairs
Outdoor Applications
Metallic's: Most coatings are available in a variety of metallic finishes. A range of metallic epoxy-polyester powder coating finishes although we can cater for most requirements.
Hammer Finishes: A full range of commercial hammer finishes can be offered. Hammer finishes offer an attractive coating which are also ideal for hiding blemishes on the original surface.
Textures: Leatherette and and fine textures are most commercially available textures as required.
Gloss Levels: Most colours are available in a range of gloss levels. We typically cater for matt, satin and full gloss finishes.
Lacquer: Clear lacquers are also available as a protective over coat where required.
Specific Applications: A range of application specific premium polyester powder coatings, some of which are detailed below:
Antibacterial Coatings: Specialist outdoor antibacterial polyester powder coatings. This antibacterial polyester powder coating can reduce bacterial population by 90% as tested on bacteria such as Listeria, E-Coli, Salmonella and Legionella whilst maintaining all of the characteristics of a regular polyester powder coating.
Furniture Coatings: Specialist exterior metal furniture powder coatings from a range of suppliers including the Interpon F1500 system which offers excellent scratch and mar resistance combined with weather & light resistance on a variety of substrates.
Anti-Graffiti Coatings: Specialist outdoor anti-grafitti powder coatings and finds applications in a range of areas where standard coatings fail to meet anti-stain criteria. The tested film properties demonstrate no staining magic markers 24 hours from application.
| Testing items |
Standards and methods |
Inspecting index |
| Impact strength |
GB/T1732-1993, AS3715 2.8 |
>50kg/cm |
| Bending resistance |
GB/T1185-88, AS1580 402.1, ISO9227 |
Pass 2-5 millimeters |
| Adhesion CHECKED TEST |
GB/T9286-88,2mm Cross cut, ISO2409 |
Pass100/100, passes 0 levels |
| Cupdrawing:Erichsen, ISO1520 |
Erichsen, ISO1520 |
Pass 3-7 millimeters |
| Pencil hardness |
GB/T6739-86, Mitsubishi |
Pass H-2H |
| Salt spray test |
GB/T1771-91,500 hours |
The cross section of corrosion less than 2MM |
Hot&damp
resistance test |
GB/T17740-79(89),1000 hours |
Without air bubbles, loses the light slightly |
Acid resistance
|
10% CH3COOH, 240 hours |
Without air bubbles, the surface without damage |
Alkali resistance
|
10% NaOH, 240 hours |
Without air bubbles, the surface without damage |
Heat resistance
|
200degree,1 hour |
The color change is lower than E=1.5 |
Solvent resistance
|
MEK24 hours soaked in solvent-free |
Without air bubbles, the surface without damage |
Uvioresistant
|
QUV-313,500 hours |
Gloss higher than 80% lower than the
Munsell color change level |
| Water tolerance |
2 hours |
No bubble, not falling, losing light |
Audited Supplier 
){kind=link}
){kind=link}