Wholesale Ral Polyester Powder Coating Paint

Product Description

We offer a full range of polyester powder coatings suitable for outdoor applications such as architectural metalwork, signage, street furniture and other applications that require light and weather resistance.

Typical applications include:
Shop Signs
Gates & Railings
Motorbike Wheels
Security Grills
Garden Tables & Chairs
Outdoor Applications

Metallic's: Most coatings are available in a variety of metallic finishes. A range of metallic epoxy-polyester powder coating finishes although we can cater for most requirements.

Hammer Finishes:  A full range of commercial hammer finishes can be offered. Hammer finishes offer an attractive coating which are also ideal for hiding blemishes on the original surface.

Textures: Leatherette and and fine textures are most commercially available textures as required.

Gloss Levels: Most colours are available in a range of gloss levels. We typically cater for matt, satin and full gloss finishes.

Lacquer: Clear lacquers are also available as a protective over coat where required.

Specific Applications: A range of application specific premium polyester powder coatings, some of which are detailed below:

Antibacterial Coatings: Specialist outdoor antibacterial polyester powder coatings. This antibacterial polyester powder coating can reduce bacterial population by 90% as tested on bacteria such as Listeria, E-Coli, Salmonella and Legionella whilst maintaining all of the characteristics of a regular polyester powder coating.

Furniture Coatings: Specialist exterior metal furniture powder coatings from a range of suppliers including the Interpon F1500 system which offers excellent scratch and mar resistance combined with weather & light resistance on a variety of substrates.

Anti-Graffiti Coatings: Specialist outdoor anti-grafitti powder coatings and finds applications in a range of areas where standard coatings fail to meet anti-stain criteria. The tested film properties demonstrate no staining magic markers 24 hours from application.


 

Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	Pass H-2H

 

Salt spray test	GB/T1771-91,500 hours	The cross section of corrosion less than 2MM
Hot&damp resistance test	GB/T17740-79(89),1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313,500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance	2 hours	No bubble, not falling, losing light