Metallic Grey/Silver Ral 9007 Ral 9022 Epoxy Powder Coatings for Kitchen Appliance

• Customization: Available
• Appearance: Powder
• Method: Spray
• Model NO.: Epoxy Powder Coatings for Kitchen Appliance
• Level: Finish Coat
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Iron
• Components: Pigment
• Formation Mechanism: Non Conversion Type
• Carton Size: 39cm*28cm*33.3cm
• New Weight: 25kgs
• Gross Weight: 26kgs
• Curing Condition: 180 Degrees 15 Minutes
• Spray Equipment: Electrostatic Spray Gun
• Shelf Life: One Year
• Samples: Available
• Color Customization: Available
• Transport Package: Standard Carton
• Specification: 25KG
• Trademark: FEIHONG
• Origin: China
• HS Code: 39070000
• Production Capacity: 300t/Month

Product Description

Company Profile

As a professional powder manufacturer in China, we offer effective powder coating solutions for a wide range of applications...furniture, home appliance, architectural and general industry market.

 

Product Description

Metallic powder coating is metallic finish powder coatings with highly decorative finishes available in any of chemistry types e.g. epoxy, polyester and epoxy-polyester. To preserve the decorative appearance of polyester-based metallic finishes for outdoor use,a clear topcoat is highly recommended.

Bonded Metallic Powder (FH-MP-B)	Dry Blending Metallic Powder (FH-MP-D)
Base powder and metallic pigments does not be divided	Base powder and metallic pigments can be divided
Can use after reclaimed Reclaim to virgin powder ration be kept as low as possible	Can not use after reclaimed Tends to separate from the power during application
High Metallic Effect	Low Metallic Effect
A little bit expensive	Cheaper than Bonded Metallic Powder
No defects on a coated film	Defects(spit, lump etc.) on a coated film
Rejection ration Below 5%	Rejection ration 30~40%
Metallic Powder had been combined with base powder	Base powder and metallic powder have been detached

GLOSS AND COLOR RANGE                                                                
 

• Gloss levels range from matt to high gloss depending on the chemistry system. 
• Smooth, flat metallics or sparkling metallics are available.
• Colors is matched upon request , no full color range is available.

 

APPLICATION SCHEDULE                                                                   

• Applied by electrostatic spraying gun that can provide negative tension of 60-80 kV.
• Curing schedule : 180-200ºC /10-15 minutes depending on the powder chemistry system.
• Optimal film thickness : 60 -90 um 

SUBSTRATES AND PRE-TREATMENT                                                        

Applied to the following substrates after the appropriate cleaning and conversion coating. 

• Ferrous metals(cold rolled steel, cast iron etc.): Iron or zinc phosphatation
• Zinc surfaces(galvanized steel, zinc alloy) : Chromatation or zinc phosphatation
• Aluminum alloys : Chromatation

STORAGE                                                                      

• Should be stored under dry conditions with good ventilation at a temperature not exceeding 30 C.
• Storage period recommended should not exceed 6 months,in case exceeding 6 months without affecting their free flowing properties, the powder will still have optimal characteristics.
• Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
• Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.

Packing:


Application:
· Pipeline industry: anti-corrosion pipeline, oil pipeline, sewage pipe, vessel water pipe, gas pipe and valves etc.
· Metal furniture: Steel furniture, documents cabinets etc.
· Kitchen utensils: gas cylinder, gas cooker, kitchen ventilator etc.
· Construction industry: door lock, rebar and steel plate.
· Electrical industry: Electronic spare parts, winding coil, and insulation coating of the rotator etc.


FAQ: