Exterior Super Weather resistant 15 years 20 years polyester /Polyurethane powder coating
Super Anti weather Powder Coating for aluminium extrution
Super Anti weather Powder Coating for aluminium profile
Specification
PROPERTY TEST METHOD RESULT
Gloss ISO 2813 20-40(GU)
Adhesion GB/T 9286 0 Grade
Hardness ISO 15184 ≥2H Pencil(Eagle)
Impact Resistance ISO 6272 50 kg.cm, Direct.
Flexibility ISO 1519 ≤Ф3 mm
Acid resistance (H2SO4 0.05mol/L@144h) GB/T9274 No cracking;adhesion ≤ class 1
Alkali resistance(NaOH 0.1mol/L@144h) GB/T9274 No cracking;adhesion ≤ class 1
Salt Spray(2000h) ISO 7253 Single side corrosion diffusion distance at the scratch ≤ 2mm, adhesion ≤ 1
UV-A(2000h) GB/T1865 No chalking;adhesion≤class 1;Δ E≤3.0
APPLICATION DATA
Pretreatment
Application Type Electrostatic Spray (50-80Kv), Cold
Recommended Bake 10-15 Minutes at 200ºC Metal Temperature
VOC Essentially Zero
Specific Gravity 1.4~1.6 g/cc
Theoretical Coverage 10~12m 2 /Kg (Film thickness 60±5μm)
Shelf Life from Date 27ºC -- 12 Months (According to produce date)
COLORS FOR POWDER COATING/POWDER PAINT
RAL colors coating powder Pantone colors
Color-matching regarding customer requirement available
GENERAL TYPES
Super anti weather Polyurethane powder coating
Super anti weather pure polyester powder coating
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10 to 15 minutes
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60-80 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coatingWe offer free samples to you.