Ral9003 Epoxy Polyester White Wrinkle Texture Sandy Rough Finish Powder Paint

Product Description

 Ral9003 epoxy polyester  white wrinkle texture sandy rough finish powder paint

DESCRIPTION

"Polyester" is a series of polyester based powder coatings with the use of TGIC
Designed for exterior or interior use.
Offering excellent light and weatherability from a single coat finish on a variety of substrates.
This series are available in a wide range of colors with different gloss and texture.

Main properties:

Excellent UV resistance for exterior application;
Good heat resistance

POWDERS

Chemistry: Polyester
Particle size: Suitable for electrostatic spray
Storage: Dry ventilation conditions below 30ºC
Curing schedule: 200ºC/10minutes;190ºC/15minutes
Specific gravity: 1.2-1,8g/cm3 up to colors

STORAGE                                                                      
 
1.Under dry conditions,good ventilation at a temperature not exceeding 30 C,humidity<60%
2.Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
3.Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
4.Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.
 

Application and Storage Conditions

1. Oil, grease and rust should be removed by degreaser. Then zinc phosphate pretreatment is recommended for optimum performance.
2. Use the electrostatic spray gun to application on substrates
3. The film should be cure on metal temperature at 200ºC for 10 minutes.
4. Film thickness should be control at 60~90 um for high performance.

5. Shelf life is six months when stored in dry conditions at 25ºC.
 

Properties	Test Method	Result
1. Specific gravity	Calculated	1.4±0.3
2. Impact Resistance	ASTM D2794	100 inch. lbs, no remove
3. Pencil Hard	ASTM D3363	H
4. 60 Degree Gloss	ASTM D523	3° ±1%
5. Salt Spray Resistance*	ASTM B117	1000 hr
6. Cross Hatch Adhesion*	ASTM D3359	5B pass
7. Humidity Resistance *	ASTM D2247, 1000hr	No Removed, no bubble
8. UV exposure*	ASTM G154(Cycle 1), 400hr	Gloss retain >50%

*Testing was performed on
Disclaimer: This product data sheet is based on our knowledge and on current laws. The data referring to powder properties, application data and physical tests is based on lab-based samples. The highest quality powder coating finish results from proper substrate surface preparation, appropriate pretreatment, effective rinse stages, proper powder coating application and sufficient temperature and dwell to ensure the powder coating is cured. Factors such as quality or cure condition of the substrate may have an effect on the use and application of the product. It remains the responsibility of the user to test thoroughly if the product is applicable for the intended use. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation. We are not liable for any application-technological advice.

Q1: Are you a factory or trading company? 
A1: We are a factory manufacturing products for over 28 years in Jinhu, China. 
Q2: Why should I use powder coatings? 
A2: There are some advantages of powder coatings. For example, they are harmless to humans. In addition, they also have resource efficiency and reduction of environmental pollution. After being coating, it forms a lasting film to protect the surface of the items. 
Q3: Why should I buy from you not from other suppliers? 
A3: We have a professional group of R&D. According to our clients' preference, we can adjust the formula to change the color, luster, appearance, and even metal texture and special patterns. Besides, we offer complete services before and after your purchasing, including color proofing, technical analysis, application recommendations, and after-sales services. 
Q4: How about the delivery date? 
A4: The delivery date will be within 15 days. 
Q5: Can you offer the sample of my ideal color? 
A5: Yes, we are pleasure to do. Please contact us to get the information. Besides, we can provide some color cards you have ordered in the delivery. 
Q6: If there is no my ideal color, what can you offer me? 
A6: We have the color proofing service, if any demands, feel free to contact us.
If any other questions, please feel free to contact us. We are glad to respond.