| Customization: | Available |
|---|---|
| CAS No.: | N/a |
| Formula: | N/a |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description:
Powder coating is a solid powdery synthetic resin coating composed of solid resin and pigments, fillers and additives. Unlike ordinary solvent-based paints and water-based paints, its dispersion medium is not solvent and water, but air. It has the characteristics of no solvent pollution, 100% film formation and low energy consumption.
Application:
· Pipeline industry: anti-corrosion pipeline, oil pipeline, sewage pipe, vessel water pipe, gas pipe and valves etc.
· Metal furniture: Steel furniture, documents cabinets etc.
· Kitchen utensils: gas cylinder, gas cooker, kitchen ventilator etc.
· Construction industry: door lock, rebar and steel plate.
· Electrical industry: Electronic spare parts, winding coil, and insulation coating of the rotator etc.
Products Series:
· Available in standard curing and lower temperature curing
· Available in multi-colors, different gloss level such as high gloss ( above 90°), flat gloss( 70-80°), semi gloss ( 10-60°), matt( below 10°), particular color and gloss is made according to customers requirements.
· Available in various kinds of art textures, such as sandy, wrinkle, lanose grain, hammer tone, metallic effect etc.
Physical Property:
Specific gravity: 1.11.8g/cm3 (varied with different color and gloss)
Particle size: average 10~38um, proportion 10~84um > 90%, it can be adjusted if special requirement is put forward to us in advance.
Curing Temperature:
Standard type: 180ºC/15 minutes
Or 160ºC/20 minutes, 200ºC/10 minutes if customer require
Pre-treatment:
The overall quality of the coating system is largely dependent on the type and quality of the pre-treatment. The recommended types of pre-treatment for the most frequently used substrates are:
|
Aluminium |
Chromate conversion |
|
Steel |
Zinc phosphate |
|
Zinc coated steel |
Zinc phosphate or chromate conversion |
Average Coating Rate:
A. Smooth Surface:
6-12/KG, film thickness 60μm (calculated according to 100 consuming of powder coating)
B. Texture Surface:
5-7/KG,film thickness is about 80-120μm
Film Performance:
|
Test Item |
Test standard and Method |
Test index |
|
|
Impact resistance |
GB/T 1732 -1993 |
ISO6272 |
50kg·cm |
|
Adhension(cross-cut) |
GB/T 9286 - 1998 |
ISO2409 |
Class 0 |
|
Flexibility |
GB/T 6742-1986 |
ISO1519 |
2mm |
|
Pencil hardness |
GB/T 6739-1996 |
ISO2815 |
1H-2H |
|
Cupping test |
GB/T 9753-1988 |
ISO1520 |
6mm |
|
Salt spray resistance |
GB/T 1771-1991 |
ISO7253 |
>400 Hours |
|
Heat & humidity resistance |
GB/T 1740-1979 |
ISO6270 |
>500 Hours,film gloss slightly lose |
|
Note: 1. Above test are using 0.30mm thickness degreased, rust removed cold rolling steel plate, film thickness is 60-80um. 2. Film performance may slightly decrease with gloss decrease. |
|||
Storage and Shipment:
The bulk powder paint must be stored in ventilated, dry and clean room with temperature below 25ºC, Keep it away from fire, heat,and direct sunlight. Outdoor stacking is prohibited. Avoid rains and exposure to sunshine during shipment.
Health and Safety:
The bulk powder paint is no hazardous ingredients contained. Wearing anti-dust mask and goggles to avoid inhalation of dust. Try best to avoid longtime contact with powder. The coating adhesive to the skin can be washed with soap.
FAQ:
1. Where is your company?
Our trading company is located in City Nanjing, Province Jiangsu, China. and our factory is located in City Huai'an, Province Jiangsu China.
2. Are you a trading company or manufacturer?
We are a company integrating industry and trade, both a manufacturer and a trader.
3. What kinds of products do you have?
We are experts in the production of thermosetting powder coatings, producing powder coatings of various colors and textures.
4. About Price:
Price depends on the color, texture and application (Indoor use or outdoor use). Also the price is negotiable. It can be changed according to your quantity. When you are making an inquiry, please let us know the quantity you want.
5. About Sample:
1kg powder coating sample is available for each color for your testing. Sample is free, we would highly appreciate it if you pay for the air freight.
6. About MOQ:
Each color ≥ 200 kg.
7. About warranty:
We are very confident in our products, and we pack them well, so usually you will receive your order in good condition. Any quality issues, we will deal with it immediately.
){kind=link}