Customization: | Available |
---|---|
CAS No.: | / |
Formula: | / |
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
GENERAL TYPES
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
Mechanical property |
||
Testing items |
Standards and methods |
Inspecting index |
Impact strength |
GB/T1732-1993, AS3715 2.8 |
>50kg/cm |
Bending resistance |
GB/T1185-88, AS1580 402.1, ISO9227 |
Pass 2-5 millimeters |
Adhesion CHECKED TEST |
GB/T9286-88,2mm Cross cut, ISO2409 |
Pass100/100, passes 0 levels |
Cupdrawing:Erichsen, ISO1520 |
Erichsen, ISO1520 |
Pass 3-7 millimeters |
Pencil hardness |
GB/T6739-86, Mitsubishi |
Pass H-2H |
Chemical resistance and weather resistance |
||
Salt spray test |
GB/T1771-91,500 hours |
The cross section of corrosion less than 2MM |
Hot and damp resistance test |
GB/T17740-79(89),1000 hours |
Without air bubbles, loses the light slightly |
Acid resistance |
10% CH3COOH, 240 hours |
Without air bubbles, the surface without damage |
Alkali resistance |
10% NaOH, 240 hours |
Without air bubbles, the surface without damage |
Heat resistance |
200degree,1 hour |
The color change is lower than E=1.5 |
Solvent resistance |
MEK24 hours soaked in solvent-free |
Without air bubbles, the surface without damage |
Uvioresistant |
QUV-313,500 hours |
Gloss higher than 80% lower than the Munsell color change level |
Water tolerance of |
2 hours |
No bubble, not falling, losing light |
We offer free samples to you.